Saturday, October 22, 2016

Enable softkey in redmi Note 2

Become common knowledge redmi Note 2 is often a problem occurs with capacitive buttons key. And that if we take it to the service center will be reimbursed the total lcd + capacitive key. Because spare parts considering a shame if it all changed, when broken only capacitive key. So another way to resolve this problem is to ask softkey to add the following command..
But before hp must have been at the root if it is not then it can be read in a previous article in http://tipstrikteknik.blogspot.co.id/2016/10/installing-twrp-and-su-root-to-xiaomi.html

If so, at HP please install ES File Explorer can be obtained in the Play Store. In ES File Explorer enable Root Explorer and give root privileges.
After that go to the directory /System on build.prop file on line later add the following command line:



qemu.hw.mainkeys=0
 

Then reboot if successful would look like this..



















To avoid confusion Button lights turn off by going to Settings --> additional settings --> Buttons and the disabled in the Button lights.
Not until here also switch off the capacitive keys in software in order to conserve battery power and reduce the error in a way to disable the following command line
In ES File Explorer go to the directory /system/usr/keylayout and edit files Generic.kl and give the remark sign (#) at:

 # key 139 MENU VIRTUAL
 # key 158 BACK VIRTUAL
 # key 172 HOME VIRTUAL

then save and reboot HP. Done .....
   

Installing TWRP and SU root to Xiaomi Redmi Note 2 using a pc / laptop

I think this is the most convenient way than others. Which need to be prepared before the install is as follows

Equipment:
1. PC or laptop
2. The built-in USB Cable
Software:
1. MI PC Suite (can be downloaded here)
2. ADB driver (can be downloaded here)
3. Tools TWRP + SU (Download TWRP, SuperSU)

How Flashing TWRP redmi note 2
===================================================================
1. Install USB drivers on your PC
2. Extract the ADB Drivers in a specific folder
3. Extract TWRP Recovery into a ADB folder Drivers earlier, Rename TWRP so (recovery.img)
4. Turn off Redmi Note 2, enter into fastboot mode by pressing (Power + Volume button below the screen off state)
5. Connect redmi Note 2 via a data cable to a PC / Laptop

See PC into the ADB folder
Right-click the folder "ADB TOOL" by pressing the "SHIFT", select Open Command Prompt
Last type "fastboot flash recovery recovery.img", then enter.

How Flash SuperSU redmi note 2
====================================================================
Put the file on the memory card SuperSu.zip
 Turn off the Hp, enter TWRP, press (Power + Volume up button) hold the two keys to successful entry
After signing in TWRP recovery, flash as usual.

Flashing process as shown in the picture below
 











This step has been successfully tested in redmi Note 2 Global MIUI 8.0 Stable